Project RECCE Rifle: Upper, Change in Trigger, and a BCG

For the Recce Rifle project, I’ve chosen a stripped lower and a trigger group.

First – the lower. I ordered a standard PSA lower. I chose the PSA for a fairly simple reason – it works, was in stock, and didn’t break the bank. It may not be as fancy as an Aero, it’s not billet, but it’s a high-quality 7075 aluminum lower that will function as well as the others. There is no sacrifice here.

Specifications:

Forged Mil-Spec Lower
Made from 7075-T6 Aluminum material
Black Hardcoat Anodized Finish
Multi-Caliber
“Safe” & “Fire” marked Fire Selector

Cost: $99 at time of publishing. Transfer fee was $15. Not bad.

Next up – the trigger group.

I was originally going to get a HIPERFIRE trigger. I’ve had loved their triggers and saw no need to change. A delivery issue had me looking at other models and picked up a CMC Single-Stage. It has a pull weight of 3.5 lbs with a very short, smooth trigger break and an audible, incredibly short reset. A truly great trigger that leads to better accuracy.

Next – an upper has been selected. MidState Firearms manufactures top-of-the-line AR accessories. I’ve built several rifles using their uppers and they have been more than excellent.

Below is their 16″ MSF Specter .223 Wylde AR-15 Upper. It comes with a 12″ Gen3 Slim Rail which free-floats.

Specifications:

16″ Ar15 Upper
1:8 Twist
4150 CM Parkerized M4 barrel
Carbine Gas
.750 Low Profile Gas Block
7075-t6 ‘mil spec’ Alumunim Receiver
M4 Feed Ramps
Gen3 Slim Free Float Rail
1/2-28 Threads
Specter Flash Hider

A bolt carrier group is needed. I grabbed a standard nitride full-auto bolt. Nothing special. Basic – which is fine with me. In my opinion, there are components which price can be an indication of quality AND performance. Bolts? Not one of them.

To go with the bolt an ambidextrous charging handle was ordered. With a scope mounted on the top rail having a charging handle that is both ambidextrous and has “ears” that stick out on the sides is a must.